 |
|
The
Hatch Net 121* System, which meets or exceeds all current
OSHA standards, will greatly reduce the risk of injury or
death from fall through in almost any hatch installation.
This protects you from costly law suits, time lost through
accidents and OSHA fines and citations. It can also lower
workers compensation and liability costs.
Because 85% of normal procedures can be accomplished with
the Hatch Net in place, one person can safely perform most
inspections without the need for an additional worker or cumbersome
fall protection equipment.
The Hatch Net 121* is an unique, lightweight net system that
will greatly reduce the risk of fall through. The system is
designed to be installed in any type of floor or roof access
hatch, or both new and existing units. The Hatch Net System
does not restrict light or visibility needed for inspections,
and the net easily slides open to facilitate access.
|
 |
 |
 Manufactured
of Aluminum and stainless steel with a highly visible synthetic
netting.
Stitched
with PTFE Sewing Thread. This thread is manufactured from high
strength expanded PTFE. Its not affected by UV (ultraviolet)
radiation, acid rain, industrial pollutants or cleaning agents.
All
systems are shipped completely assembled including mounting
hardware.
Easily
installed in virtually any floor or roof opening, new or existing
application in minutes. |
Retracts
easily for access to confined space or to pull pumps and equipment.
Greatly
improves employee safety while allowing freedom of movement
and full visibility of area below net for inspections and
sampling.
Many
sizes in stock, custom sizes are manufactured in days at no
additional cost.
Full
five (5) year warranty on hardware and net.
|
 |
| Basic
Use: A rail mounted safety net system designed to be installed
in all types of floor access and roof hatches to reduce risks
associated with open hatches. The safety net system provides
protection during the initial opening of this hatch and maintains
protection after access has been gained. The safety net easily
slides on guide rails to facilitate entry and then repositioned
to prevent fall through. This system also provides excellent
fall through protection while a hatch or other opening is left
uncovered, and/or while a worker is below.
HATCH
NET 121 can be manufactured to fit 150#, 300#, H-20 live load,
and roof hatch.
Composition
and Materials: The rails and slide hooks for the Hatch Net
121 are made from aluminum. The netting is polyester. The
corner hooks and eye bolts are 316 stainless steel.
Limitations:
The safety net system after installation should be maintained
in the closed position after each use.
The
Hatch Net is a fall protection system. At no time is the net
to be used as a work platform, lifting mechanism, tool holder,
tie off point, or to attach any other equipment to it.
|
|
N/A
|
N/A |
|
|
Hatch
Net 121