The Spider-Line provides an easy to install tie-off point for multiple ironworkers and other construction personnel who must work at heights before flooring or other fall protection is available.

Provides active fall protection.

Can be installed almost anywhere on a beam.

Easily installed – attaches to beam with chain assembly and two (2) structural bolts.

Protects your workers economically.

Can be used on perimeter of building.

Mounts at angle out of the way of workers.

Available for use on 6" wide steel beams or greater.

Pass Through Thimble: 1 1/8" ID Tube

Chain Assembly: 1/4" Grade 70 chain. 10,000 lb. flange hook from 1/2" to 7/8" flange thickness. 5/16" Single Acting Pin 12,800 shear strength. Weighted wing nut with working load of 12,500 lbs. Continuous High Tensile Coil Rod is manufactured of high tensile steel with a 19,000 lb. safe working load.

*A large flange adapter is available to fit a 1" to 2 1/4" flange.

Shock Absorber: 2" Schedule 40 Tubing. A-36 End Caps. Cold Rolled Steel Coil.

Cable: 3/8" Diameter Galvanized Aircraft Cable. Minimum Breaking Strength 14,400 lbs.

Combination Clamp & Thimble: Material is cast steel, rope diameter 3/8" bolt torque, measuring 40 ft/lbs. Working load limit is 2,200 lbs.

Jaw & Jaw Turnbuckle: Galvanized steel. 1/2" x 12". 2,200 lb. working load limit. Minimum closed 17 1/2". Maximum Open 20 1/2"

Fist Grip Wire Rope Clip: for 3/8" wire rope, forged steel saddles, entire clip is galvanized. Torque bolts to 45 ft/lbs. Fist Grip Clips meet or exceed the performance requirements of Federal Specification FF-C-450 Type III, Class 1, except for those provisions required of the contractor.

Shackle: 1 1/2 ton working load limit. Forged - quenched and tempered, with alloy pins. Bolt type Chain Shackle. Thin hex-head bolt, nut with cotter pin. Meets the requirements of Federal Specification RR-C271D Type IVB, Grade A, Class III, except those provisions required of the contractor.

N/A